brake safety

When you press the brake pedal on your truck, you expect an instant response. Yet any number of issues can cause your vehicle’s braking systems to fail, increasing your risk of a serious accident while putting you and your cargo in danger. That’s why maintaining your truck’s braking system is so important and a major part of your Pre-Trip Inspection.

To ensure brake safety every day of the year, here are 10 tips to help ensure your brake linings and pads are ready for the road:

1. Inspect all the parts of the brake linings and pads that you can see during pre- and post-trip inspections.

2. Check for signs of missing or damaged brake lining, such as grooves in the drum from rivet contact.

3. Look at the shoe-to-drum clearance and ensure that there is adequate lining on the shoe.

4. Try to find any signs of leaks from the hub or other components that may contaminate the lining or pad surface.

5. Look for any missing lining blocks.

6. Scan for visible cracks or voids in the lining block.

7. Check for any exposed rivets or lining blocks that look loose on the shoe.

8. On disc brakes, pay close attention to the condition of the rotor. Look for either metal-to-metal contact or heavily rusted rotors across the entire friction surface on either side.

9. Make any repairs in accordance with the brake manufacturer’s requirements and guidelines.

10. Note any brake lining or pad-related issues in your driver vehicle inspection reports and report them to the motor carrier.

In addition, always check for these brake-related items during pre- and post-trip inspections:

  • Any missing, non-functioning, loose or cracked parts
  • Audible air leaks coming from around the brake components and lines
  • Slack adjusters that are different lengths
  • Air pressure below 90-100 psi
  • Rust holes or broken springs in the brake housing section of the parking brake
  • Malfunctioning ABS warning lamps

Remember, a properly conducted pre-trip inspection will go a long way toward passing a brake inspection — and keeping you and those around you safe.

If you haven’t recently checked all the components of your truck’s brake system, now is the time to get it done to keep you and others safe on the road. Plus, you'll be ready for your next inspection.

[Read more...]Show less

The Commercial Vehicle Safety Alliance (CVSA) is keeping its focus on brakes with its Brake Safety Week, which is scheduled to take place Aug. 23-29. However, brake safety is crucial year-round, and regular inspections by qualified service technicians and proper pre- and post-trip inspections by drivers can ensure brakes perform as expected.

[Read more...]Show less